Job description for flexographic printing equipment operator

Work instructions for a framer (3rd category)

The framer is charged with: 5.1. Performing auxiliary operations for moving logs and beams during longitudinal sawing within the working area, removing lumber from the workplace.

5.2. Control of front and rear frame mechanisms that supply raw materials. 5.3. Adjustment of riving knives. 6. The framer has the right: 6.1. Require periodic training on labor protection.

6.2. Have the necessary instructions, tools, personal protective equipment for work and require the administration to provide them. 6.3. Familiarize yourself with the internal labor regulations and the collective agreement. 6.4. Make proposals for improving work technology.

6.5. ________________________________________________________________. 7.2.

Job description of a framer

The framer must know:

types and sizes of logs;
properties of cutting tools and methods for checking the quality of its preparation;
quantitative and qualitative yield of finished products using different methods of cutting logs and logs for the production of sliced veneer and container sets;
wood defects, purpose and basic requirements for manufactured lumber products;
rules and regulations of labor protection, safety and fire protection.
Labor regulations;
design features of the equipment being serviced;
methods and modes of rational longitudinal sawing of logs and ridges of various types of wood, depending on the diameter of the raw material and wood defects;

1.6.

(other rights taking into account the specifics of the organization) 7. The framer is responsible for: 7.1. For failure to perform (improper performance) of one’s work, within the limits determined by the current labor legislation of the Republic of Belarus. 2.

IV. Responsibility

The operator of flexographic printing equipment is responsible for:

1. For improper performance or failure to fulfill one’s job duties provided for in this job description - within the limits determined by the current labor legislation of the Russian Federation.

2. For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of the Russian Federation.

3. For causing material damage - within the limits determined by the current labor and civil legislation of the Russian Federation.

4. ____________________________________________________________________

This job description has been developed in accordance with the provisions (requirements) of the Labor Code of the Russian Federation dated December 30, 2001 No. 197 FZ (Labor Code of the Russian Federation) (with amendments and additions), the professional standard “Operator of flexographic printing equipment” approved by order of the Ministry of Labor and Social Protection Russian Federation dated March 20, 2020 No. 168n and other legal acts regulating labor relations.

Job description for sawmill worker

In his activities, the sawmill worker is guided by: - local regulations of Beta LLC, including the Internal Labor Regulations; - orders (instructions) of the general director of Beta LLC; - this Job Description. 1.7.

The framer reports to the immediate supervisor. 1.7. During the framer's absence (vacation, illness, etc.), his duties are performed by a person appointed in the prescribed manner.

During the period of temporary absence of the sawmill worker, his duties are assigned to the employee appointed by order of the general director of Beta LLC.2. JOB RESPONSIBILITIES A sawmill worker performs the following types of work: 2.1. Sawing logs, logs and beams from various types of wood into lumber and blanks on band saws. 2.2.

Trimming of lumber in the sawmill stream.2.3. Selection of optimal sawing modes.2.4. Adjustment: – lumber delivery size; – guide knives. 2.5.

Checking the quality of saw preparation. Installation, change and editing of saws.2.6. Determining the causes of equipment malfunctions and eliminating them.2.7.

Professional ranks crushing plant operator

The specialty has three qualification levels. The difference between the grades is what raw materials are used.

Crushing plant operator 2nd category

Manages equipment and also controls the process of grinding raw materials: brick, chalk, limestone, spices, ice, meal, cake. In addition, it is used when carrying out preventive repairs of equipment.

Crushing plant operator 3rd category

It specializes in other raw materials: beans, grain. His responsibilities include a full range of equipment maintenance.

Crushing plant operator 4th category

Grinds malt, cocoa beans, bones, limestone stone.

Operator's instructions for lumber processing plants and lines

(types, names and details of other acts and documents) 1.3. The operator of installations and lines for processing lumber of the 5th category must know: - documents, objects, methods and techniques for performing work specified in paragraph 1.2 of these instructions; — design and rules for setting up the equipment being serviced; — standards for lumber and sawn raw materials; — species and defects of wood; — rules for sorting lumber and sawn raw materials; — purpose and rules for using control and measuring instruments; — _____________________________________________________________________. (types, names and details of other acts and documents) 1.4.

The operator of installations and lines for processing lumber of the 6th category must know: - documents, objects, methods and techniques for performing work specified in paragraphs 1.2 - 1.3 of these instructions; — kinematic diagrams of the equipment being serviced; — rules for trimming and marking lumber;

We recommend reading: Who grants political asylum

Job responsibilities

A 4th category shot blaster performs the following labor functions:

2.1. Cleaning the surfaces of building structures, apparatus and equipment using a shot blasting machine. Fastening and extension of hoses.

2.2. Tip attachment.

2.3. Rearranging and securing cradles or stepladders when performing work on cleaning the surfaces of building structures.

In case of official necessity, a 4th category shot blaster may be involved in performing duties overtime, in the manner prescribed by law.

Professional standards

lumber per year B/02.4 4 Maintenance of components and mechanisms of debarking machines, single-story sawmill frames, horizontal band saws, circular saws B/03.4 4 C Production of general purpose lumber for domestic and export consumption 4 Conducting the process of sorting logs for sawing into lumber for domestic and export consumption C/01.4 4 Conducting the process of processing logs on debarking, milling, milling and chipping lines, sawmill frames and lines for aggregate processing of logs with a capacity of up to 50,000 cubic meters.

sawn timber per year C/02.4 4 Maintenance of components, mechanisms and ensuring synchronous operation of all sections of debarking, milling, milling and chipping lines, two-story sawmill frames and lines for aggregate processing of logs C/03.4 4 D Production of lumber for domestic and export purposes

Job description for a sawyer (sample)

(other duties) 2.3. The sawyer must know: - rules for longitudinal sawing of logs; — requirements for timber (standards, technical specifications for them); — rules for sharpening and straightening saws for longitudinal sawing of logs; — rules for maintaining the equipment used in good condition and carrying out its routine repairs; — requirements for the use of protective equipment; — methods and techniques for performing work safely; — the procedure for notifying the manager of all deficiencies discovered during work; — rules for providing first (pre-medical) aid to victims of injury, poisoning and sudden illness; — Internal labor regulations; — rules of labor protection, industrial sanitation and personal hygiene, fire safety; — . (types, names and details of other acts and documents) 1.3. . 2. Responsibilities 2.1. AttentionOfficials

Job description for sawmill operator

for normal production.

3.12. This sequence will save you from the costs associated with buying a workshop and a lot of tools if you change your mind about woodworking. To get started, you will need: a hammer, various screwdrivers, nails, several chisels, a hacksaw, a square, a work table, several clamps or clamps.

The first and most necessary tools are a drill and a jigsaw.

These tools are used everywhere, not just in woodworking. You won't be able to make really good furniture with them, but they will be enough for some things. jigsaw, drill There are many types of tools and a wide variety of prices for them. Sellers will offer you quality tools that will last you a lifetime.

But the cost of ordinary tools can be an order of magnitude lower than not much higher quality and advertised branded tools.

Manages the production and economic activities of the woodworking shop.

Job description of an operator on automatic and semi-automatic lines in woodworking of the 5th category

1.5.

The employee must know: - design features of the equipment being serviced; — electric locking system; — techniques and rules for assembling cutting tools; — technical specifications for adhesives; — finishing and abrasive materials and cutting tools; — rules for cutting the ends of pencils; — modes of drying veneer strips, veneering, sanding, polishing varnish film and finishing; — purpose and rules for using instrumentation; — rules for using personal protective equipment; — requirements for the quality of work (services) performed and for the rational organization of labor in the workplace; — rules on labor protection and safety, fire safety, industrial sanitation; — basics of labor legislation of the Russian Federation; - this job description.

1.6. During the period of temporary absence of the Employee, his duties are assigned to ___________________________.

Job Crushing Plant Operator in Russia - 19 vacancies

Monitoring the uniform flow and distribution of raw materials and supplies to crushers, screens, sieves, feeders, conveyors and other serviced equipment.

Regulation of water supply for irrigation, uniform loading and speed, productivity, gaps between the working mechanisms of crushers, depending on the type of raw materials, materials and their size.

The twisting equipment operator is appointed to the position and dismissed by the head of the department in agreement with the head of the department.

For external work and when working at open ranges, additionally in winter the following are issued: cotton jacket and trousers with insulating lining, felt boots.

JOB DESCRIPTION for a drilling rig operator of the 1st category 1. GENERAL PROVISIONS 1.1. This job description defines the functional duties, rights and responsibilities of a drilling rig operator of the th category "" (hereinafter referred to as the "Organization"). 1.2.

This job description defines and regulates the powers, functional and job responsibilities, rights and responsibilities of the crusher (hereinafter referred to as the Company).

To anyone who strives to strengthen their positions in the team and win the trust of colleagues, John Maxwell will reveal the secrets of effective communication that will allow you, even in the most hopeless cases, to establish and maintain truly warm relationships with the people around you.

A person with ________ professional education and ____ years of work experience in the specialty is appointed to the position of Crushing Plant Operator (without presenting requirements for work experience).

Slinging and loading and unloading operations at the drilling rig. 2.25. Maintaining primary technical documentation. 3. Rights of an employee A drilling rig operator of the 3rd category has the right to: 3.1. For all social guarantees provided for by law.

Occupational Safety and Health

3.2 Internal documents: Charter of the enterprise, Orders and instructions of the director of the enterprise (head of the woodworking shop); Regulations on the woodworking shop, Job description of the operator on automatic and semi-automatic lines in woodworking, Internal labor regulations.

Job responsibilities of an operator on automatic and semi-automatic lines in woodworking

We recommend reading: What document proves the identity of a foreign citizen in the Russian Federation who has received temporary asylum

4.1.

An operator on automatic and semi-automatic lines in woodworking before starting the working day: - undergoes periodic medical examinations in accordance with the established procedure; — undergoes instructions on labor protection and safety in accordance with the established procedure; - takes over the workplace; — prepares the workplace and personal protective equipment; — checks the serviceability of equipment, tools and devices; 4.2.

During work, the operator on automatic

Job description for operator of automatic and semi-automatic lines, machines and installations of the 2nd category

An operator of automatic and semi-automatic lines, machines and installations of the 2nd category reports directly to [name of the position of the immediate supervisor in the dative case] of the Company. 1.4. A person with secondary education and professional training is appointed to the position of operator of automatic and semi-automatic lines, machines and installations of the 2nd category without presenting requirements for work experience. 1.5. An operator of automatic and semi-automatic lines, machines and installations of the 2nd category must know:

operating principle of a serviced automatic and semi-automatic line of machines and installations; names, purpose, device and conditions of use of the most common devices, cutting, control and measuring instruments; name and marking of processed materials; system of admissions and landings;

What are the job responsibilities of a CNC machine operator?

A CNC machine is a complex electromechanical device, which today is an integral part of many industries and requires the presence of two specialists for maintenance: an adjuster and an operator. Despite the fact that the operator’s work with the machine requires less qualifications than that of the installer, the operator comes into contact with the device more often.

The main job responsibilities of a CNC machine operator are:

in equipment maintenance;
carrying out measuring work;
setting up equipment for manufacturing a series of parts according to specified parameters.

A complete list of job responsibilities for a CNC machine operator is established in the job description, which is developed by each organization independently.

Job description for sawmill laborer

Before performing work associated with increased danger, the employee undergoes industrial training on safety rules.1.7.

In his activities, the Employee is guided by: - regulations and methodological materials on the work performed; — Internal labor regulations; — orders and instructions of the Employer and immediate supervisor; — this job description; — rules on labor protection, industrial sanitation and fire protection.2.

FUNCTIONAL RESPONSIBILITIES OF AN EMPLOYER Performing auxiliary and auxiliary work at production sites and construction sites, warehouses, bases, streets, buildings and structures, storerooms, etc. Loading, unloading, moving manually or on trolleys (trolleys) and stacking cargo that does not require caution (rolled materials, parquet in packs, boxes, barrels, cardboard, paper, plywood, lumber, etc.)

Responsibility

The crusher is subject to administrative, material and disciplinary (and in special cases established by the laws of the Russian Federation, criminal) liability for:

Failure to perform or poor performance of official duties assigned to him by immediate management.
For an offense committed during the performance of work.
In case of damage to the material property of the enterprise - within the limits established by Russian legislation.
For failure to comply with labor discipline.
Use of official powers for personal gain.
Disclosure of information about the organization that is a trade secret.

Occupational Safety and Health

3.2 Internal documents: Charter of the enterprise, Orders and instructions of the director of the enterprise (head of the woodworking shop); Regulations on the woodworking shop, Job description for the operator of installations and lumber processing lines, Internal labor regulations.

Job responsibilities of the operator of lumber processing plants and lines

4.1. The operator of installations and lumber processing lines before starting the working day: - undergoes periodic medical examinations in accordance with the established procedure; — undergoes instructions on labor protection and safety in accordance with the established procedure; - takes over the workplace; — prepares the workplace and personal protective equipment; — checks the serviceability of equipment, tools and devices; 4.2.

During work, the operator of installations and lumber processing lines: - observes personal hygiene requirements

Job description of the operator on automatic and semi-automatic lines in woodworking of the 6th category

1.5.

The employee must know: - kinematic diagrams of the equipment being serviced, the basics of pneumatic, hydraulic, electrical automation and electromechanics; — technological modes of processing parts; — technical specifications for processed products; — rules for using personal protective equipment; — requirements for the quality of work (services) performed and for the rational organization of labor in the workplace; — rules on labor protection and safety, fire safety, industrial sanitation; — basics of labor legislation of the Russian Federation; - this job description.

Standard Job Responsibilities for a CNC Machine Operator

The list of job responsibilities of a CNC machine operator can be divided into several groups:

actions before the start of the work shift;
actions during the work shift;
actions at the end of the work shift.

Before the start of the work shift, the operator must:
study the operational and technological map for the part being manufactured;
check the condition of the equipment, call an adjuster if necessary;
check the completeness and serviceability of the instruments and, if necessary, replace them;
ensure compliance with work process safety rules;
turn on and prepare the machine for operation.
During operation, the operator's responsibilities are as follows:
manufacturing of parts;
transfer of the first manufactured part from the batch to the quality control department;
control of manufactured parts according to the existing scheme;
adjustment of tool geometry;
replacement of instruments as necessary;
placement of finished parts according to storage plans;
maintaining a work log with notes on problems and inconsistencies that appeared during the shift;
delivery of products.
At the end of the work shift, the operator of CNC machines is obliged to:
hand over tools and equipment;
report to your immediate superior on product output and equipment condition;
turn off the machine and other mechanisms used in the work;
record in a special journal the changes made to the machine settings.

When defining the job responsibilities of a CNC machine operator in the job description, it is necessary to take into account that the labor functions of this employee may be different, since they depend on the rank of specialist, the type of machine on which he works, and the direction of the enterprise.