Employment contract with an electric and gas welder: form, sample 2020

Home / Labor

Back

Published: 04/08/2020

Reading time: 17 min

1 Job description for electric gas welder, manual welding, 5th category
2 1. General provisions
3 Responsibilities of a 5th grade welder
4 Functions of a 5th category electric gas welder 4.1 5th category welder
4.2 Electric and gas welder
4.3 Electric and gas welder

5 3. Rights

6 4. Responsibility

7 5. Apply robot

Job description for electric gas welder, manual welding, 5th category

An electric welder of manual welding of the 5th category has the right to: Report to management about all identified deficiencies within his competence. Make proposals for improving work related to the responsibilities provided for in this job description.

Demand that management create the necessary conditions for the performance of job duties. Get acquainted with draft decisions of the organization’s management relating to its activities. Request from managers and specialists of the organization information and documents necessary to perform job duties.

Involve specialists from other departments in solving the tasks assigned to him. Responsibility.

Russian Federation.

The electric welder of manual welding is liable for causing material damage - within the limits determined by the current labor and civil legislation of the Russian Federation.
The manual welder is responsible for compliance with current instructions, orders and regulations for maintaining trade secrets and confidential information.
The manual welder is responsible for compliance with internal regulations, safety and fire safety rules.

This job description has been developed in accordance with (name, number and date of the document) Head of the structural unit: 00.00.00 (signature) surname, initials AGREED BY: Head of the legal department: 00.00.00 (signature) surname, initials I have read the instructions: 00.00 .00g.

Understanding the General Requirements

All welders must have a minimum of knowledge about the essence of physical and chemical transformations when welding parts, safe work rules, principles of equipment operation, properties of the materials used, fundamentals of technology and electrical engineering. The main responsibilities are written down in the job description.

Each welding specialist, regardless of the level of qualification, is obliged to:

carry out all types of preparatory and main work in strict accordance with the manual welding plan;
provide quality results;
competently plan the volume of work performed and the optimal timing for its completion;
participate, taking into account the specific characteristics of the profession, in process improvement;
correctly place orders for all necessary materials;
comply with regulatory welding regimes;
analyze the results;
follow job instructions.

The specialty of an electric welder implies the presence of a certain general educational and personal level in the employee. This activity has always been and will be prestigious, in demand, promising and well paid.

The required amount of skills and knowledge is set out in the job descriptions of each specific electric welder at a specific production.

https://youtu.be/VIEBaRTvRqc

General provisions

1.1. The position “Electric welder of manual welding of the 5th category” belongs to the category “Workers”.

1.2. Qualification requirements: vocational and technical education. Advanced training and work experience in the profession of electric welder, manual welding 4th category - at least 1 year.

1.3. Knows and applies in practice: - electrical circuits and designs of various types of welding machines; - technological properties of welded metals, metal deposited with electrodes of various brands, and castings that are subject to planing; - technology for welding critical products in chambers with a controlled atmosphere;

1.4. An electric welder of manual welding of the 5th category is appointed to the position and dismissed from the position by order of the organization (enterprise/institution).

1.5. A manual welder of the 5th category reports directly to _ _ _ _ _ _ _ _ _ _ .

1.6. A manual welder of the 5th category supervises the work of _ _ _ _ _ _ _ _ _ _ .

1.7. During an absence, an electric welder of manual welding of the 5th category is replaced by a person appointed in the prescribed manner, who acquires the appropriate rights and is responsible for the proper performance of the duties assigned to him.

Specialist tools and accessories

Convenient and high-quality electrode holder (lightweight - up to 0.5 kg).
A head mask or welder's shield to protect the eyes and face from infrared rays.
Cables for connecting the device to a source of electric current and for creating a working arc.
Manual welders use metal brushes to clean the surface.
Hammer for removing slag from a seam.
Chisel for removing seam defects.
Ruler, square, tape measure, template set.
Special clothing for a welder.

Responsibilities of a 5th grade welder

Job description of a 5th grade welder Reading drawings of varying complexity of welded spatial metal structures.

Must know: electrical circuits and designs of various welding machines, automatic, semi-automatic and power supplies; technological properties of welded metals, including high-alloy steels, as well as deposited metal and metal being planed; selection of technological sequence for applying welds;

the influence of heat treatment on the properties of the weld, rules for cutting metals under water. Examples of work1. Embrasures of blast furnaces - surfacing of shells and cracks.2. Equipment and vessels made of carbon steels operating under pressure and alloy steels operating without pressure - welding.3. Open hearth furnace fittings - welding during repair of existing equipment.4.

A manual welder of the 5th category must know: labor protection and fire safety rules; internal labor regulations; rules for using personal protective equipment; requirements for the quality of work performed; types of defects and methods for their prevention and elimination;

requirements for the rational organization of labor in the workplace; electrical circuits and designs of various types of welding machines; technological properties of welded metals, metal deposited with electrodes of various brands and castings subjected to planing; technology for welding critical products in chambers with a controlled atmosphere;

Cylinder blocks and water manifolds of diesel engines - welding. Large crankshafts - welding. Gas tanks and tanks for petroleum products with a volume of 5000 cubic meters and more - welding under stationary conditions. Gas and oil product pipelines - welding on a rack. Parts of machines and mechanisms (charging devices for blast furnaces, propellers screws, turbine blades, rolling mill rolls, etc.

) - for melting with special, hard, wear-resistant and corrosion-resistant materials. Forged, stamped and cast parts of machines, mechanisms and structures (propellers, turbine blades, cylinder blocks of parts, etc.) - fusing of defects. Caissons for open-hearth furnaces working at high temperatures - welding.

Columns, bunkers, rafter and sub-rafter trusses, beams, trestles, etc.

methods for monitoring and testing critical welds
rules for reading drawings of complex welded spatial metal structures.

3. Job responsibilities:

Manual arc and plasma welding of complex devices, components, structures and pipelines made of various steels, non-ferrous metals and alloys.
Manual arc and plasma welding of complex building and technological structures operating in difficult conditions.
Manual oxygen arc cutting (planing) of complex parts made of high-carbon, alloy and special steels and cast iron.
Welding of complex structures in block design in all spatial positions of the weld.
Fusion of defects in various machine parts, mechanisms and structures.
Welding of complex parts and assemblies.

page 1 Job description Electric welder, manual welder.

2.1. Performs manual arc and plasma welding of complex and critical devices, components, structures and pipelines made of various steels, non-ferrous metals and alloys.

2.2. Performs manual arc and plasma welding of critical complex building and technological structures that operate in difficult conditions.

2.3. Performs manual oxygen arc cutting (planing) of particularly complex and critical parts made of high-carbon, alloy and special steels and cast iron.

2.4. Welds critical structures in block design in all spatial positions of the weld.

2.5. Welds defects in critical parts of machines, mechanisms and structures.

2.6. Fused especially complex and critical parts and assemblies.

2.7. Knows, understands and applies current regulations relating to his activities.

2.8. Knows and complies with the requirements of regulations on labor protection and environmental protection, complies with the norms, methods and techniques for the safe performance of work.

5.1. Apparatuses and vessels made of carbon steels operating under pressure and alloy steels operating without pressure - welding.

5.2. Open hearth furnace fittings - welding during repair of existing equipment.

5.3. Reinforcement of load-bearing and critical reinforced concrete structures: foundations, columns, floors, etc. - welding.

5.4. Tanks of unique powerful transformers - welding, including welding of lifting hooks, jacking brackets, stainless steel plates that operate under dynamic loads.

5.5. Beams and traverses of crane trolleys and balancers - welding.

5.6. Beams and purlins for overhead cranes with a lifting capacity of less than 30 tons - welding.

5.7. Center beams, buffer beams, pivot beams, frames of locomotive and wagon bogies, wagon body trusses - welding.

5.8. Boiler drums with pressure up to 4.0 MPa (38.7 atm) - welding.

5.9. Blocks of building and technological structures made of sheet metal (air heaters, scrubbers, blast furnace casings, separators, reactors, blast furnace flues, etc.) - welding.

5.10. Cylinder blocks and water manifolds of diesel engines - welding.

5.11. Large crankshafts - welding.

5.12. Assemblies of sub-engine frames and shock absorber cylinders of aircraft landing gear - welding.

5.13. Gas holders and tanks for petroleum products with a volume of 5000 cubic meters or more - welding in stationary conditions.

We invite you to familiarize yourself with the responsibility of heirs for the debts of the testator in 2020

5.14. Gas and oil product pipelines - welding on racks.

5.15. Propellers - welding of steel, cast and forged blades.

5.16. Propellers, hub blades of medium, high and special accuracy classes of all sizes and designs - air-arc planing of all surfaces of the propeller, blades and hubs.

5.17. Forged, stamped and cast parts of critical machines, mechanisms and structures (propellers, turbine blades, cylinder blocks of parts, etc.) - surfacing of defects.

5.18. Parts of especially critical machines and mechanisms (charging devices of blast furnaces, propellers, turbine blades, rolls of rolling mills, etc.) - surfacing with special, hard, wear-resistant and corrosion-resistant materials for pumps.

5.19. Caissons for open hearth furnaces operating at high temperatures - welding.

5.20. Columns, bunkers, rafter and sub-rafter trusses, beams, trestles, etc. - welding.

5.21. Structures of radio towers, television towers and power line supports - welding in stationary conditions.

5.22. The bodies of shearers, trucks, coal miners and mine electric locomotives are welded.

5.23. Head housings, traverses, bases and other complex components of presses and hammers - welding.

5.24. Rotor housings with a diameter of over 3500 mm are welded.

5.25. Turbine stop valve bodies with power over 25,000 kW are welded.

5.26. Covers, stators and linings of blades and hydraulic turbines are welded.

5.27. The base of high-alloy drill pipes for drilling rigs and tri-diesel drives is welded.

5.28. Foundation slabs for a walking excavator unit - welding.

5.29. Frames and components of cars and diesel engines - welding.

5.30. Kingpin and diesel locomotive frames - welding.

5.31. Tanks for petroleum products with a capacity from 1000 to 5000 cubic meters - welding during installation.

5.32. Joints of reinforcement outlets of elements of load-bearing prefabricated reinforced concrete structures - welding.

5.33. Pipe elements of steam boilers with pressure up to 4.0 MPa (38.7 atm) - welding.

5.34. Pipelines of external and internal low-pressure gas supply networks - welding during installation.

5.35. Pipelines of external and internal gas supply networks of medium and high pressure - welding in stationary conditions.

5.36. Technological pipelines of III and IV categories (groups), steam and water pipelines of III and IV categories - welding.

5.37. Tires, tapes, expansion joints for them made of non-ferrous metals - welding.

5.38. Masts, drilling rigs and production rigs - welding during installation.

5.39. Electric arc welding: Fittings, pipelines, branches, flanges, fittings, cylinders, tanks, tanks made of corrosion-resistant steels operating under pressure from 1.5 to 4 MPa (from 15 to 40 kgf/sq.cm).

5.40. Sternposts, stems - welding of joints and welding of external plating.

5.41. Intermediate shafts, propeller and stern tubes - welding.

5.42. Vertical keels and tight stringers - welding of installation joints.

5.43. Critical structures - welding of joints and grooves.

5.44. Parts operating under vibration loads - welding of sections.

5.45. Shelf parts are welded to the main hull and to the final transverse bulkheads.

5.46. Gas-tight decking - welding and welding to the main body.

5.47. Welding and entry of tight bulkheads and stringers, stabilizers, rudders, nozzles, nacelles - welding on site.

5.48. End and intercompartment bulkheads are welded to the main body.

5.49. Stabilizing columns, braces, tubular and box-shaped connections of floating drilling rigs - welding during installation on the parade ground.

5.50. Hatch coamings made of alloy steel are welded to the hull plating (under the supervision of a technologist).

5.51. Structures made of low-magnetic steel with a metal thickness of 1.5 to 3 mm, welded steels - welding.

5.52. Cones of ship pumps, nozzle segments with milling blades, ship steering gears (cylinders, plungers, valve boxes) - welding.

5.53. Stern and bow edges in confined spaces in a workshop environment - welding of the set to each other and to the trim of the edges.

5.54. Boat hulls (repair) - welding.

5.55. Ship hulls made of carbon and low-alloy steels - welding of joints and grooves of the outer skin in all spatial positions.

5.56. Brackets, mortars and propeller fillets - welding, welding of joints, welding to the hull.

5.57. Brackets, mortars, propeller cores - welding and welding on ships.

5.58. Set with cutting edges, joints and grooves of bulkheads - composition and welding in the preliminary preparation area.

5.59. Anchor fairlead niches are welded to the outer skin of the slipway.

5.60. Sheathing of the outer body - welding of installation joints.

Welder employment contract

If the Employee’s property is used irregularly for official purposes, the provisions specified in paragraph.

9.1 compensation is paid on the basis of documents and other evidence confirming the official use of such property. 10. TERMINATION OF THE AGREEMENT 10.1. The grounds for termination of this employment contract are: 10.1.1.

Agreement of the parties. 10.1.2. Termination of an employment contract at the initiative of the Employee.

In this case, the Employee is obliged to notify the Employer no later than two weeks before the expected date of termination of this agreement.

The specified period begins the next day after the Employer receives the Employee’s resignation letter. 10.1.3.

Termination of an employment contract at the initiative of the Employer.

Other grounds provided for by the labor legislation of the Russian Federation.

Functions of a 5th category electric gas welder

Automatic welding of building and technological structures operating under dynamic and vibration loads.
Mechanized welding of complex building and technological structures operating in difficult conditions.
Manual electric arc air planing of complex parts made of various steels, cast iron, non-ferrous metals and alloys in various positions.
Welding of structures in block design in all spatial positions of the weld.
Welding and surfacing of cracks and cavities in thin-walled products and in products with hard-to-reach places for welding.
Heat treatment of welded joints with a gas torch after welding.
Reading drawings of varying complexity of welded spatial metal structures.
.
.
III.

Welder 5th category

An electric gas welder of the 5th category is responsible: - for failure to perform or improper performance of his job duties provided for by this job description - within the limits determined by the current labor legislation of the Russian Federation; - for causing material damage - within the limits determined by the current labor and civil legislation of the Russian Federation;

- for offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal, civil legislation of the Russian Federation. The job description has been developed in accordance with. (name, number and date of the document) Head of the structural unit (initials, surname) (signature) » » 20 Agreed by: Head of the legal department (initials, surname) (signature) » » 20

Electric and gas welder

A 5th grade welder is considered a worker;
The specialist must have all the necessary knowledge about the nuances of the operation of the equipment that one has to deal with, which includes a welding transformer, automatic and semi-automatic devices, oxygen cutters, etc.;
The employee is responsible for all types of work performed by him;
The specialist must follow the orders of management regarding his direct duties;
It is necessary to know the charter and its compliance, comply with the rules and regulations of labor protection, follow regulations;
The worker reports only to his immediate superior.

The job descriptions of a semi-automatic welding welder coincide with the standard standard ones, since in any case, with category 5, the specialist must know the diagrams and operating features of all devices with which work is carried out. Unified Tariff and Qualification Directory of Work and Professions of Workers Section “Welding Work” § 48.

Electric and gas welder 5th category Characteristics of work. Manual arc, plasma and gas welding of various complexity of devices, parts, assemblies, structures and pipelines made of various steels, cast iron, non-ferrous metals and alloys, designed to work under dynamic and vibration loads and under pressure.

Manual arc and plasma welding of complex building and technological structures operating in difficult conditions. Oxygen and plasma linear and horizontal cutting of complex parts from various steels, non-ferrous metals and alloys according to manual markings with cutting edges for welding, including the use of special fluxes from various steels and alloys. Oxygen cutting of metals under water.

We invite you to read the Assignment of responsibilities for the vacant position

Electric gas welder 5th categoryDivision: 1. General provisions:

Subordination:
An electric gas welder of the 5th category is directly subordinate to ……………………
An electric gas welder of the 5th category follows the instructions of …………………………………………….
(the instructions of these employees are followed only if they do not contradict the instructions of the immediate supervisor). Substitution:
Electric gas welder of the 5th category replaces…………………………………………………………………………………………
Electric gas welder of the 5th category is replaced by …………………………………………………………………….
Hiring and dismissal from position: An electric and gas welder is appointed to a position and dismissed from position by the head of the department in agreement with the head of the department.

Reading drawings of varying complexity of welded spatial metal structures.

Equipment and vessels made of carbon steels operating under pressure and alloy steels operating without pressure - welding.3. Open hearth furnace fittings - welding during repair of existing equipment.4.

Reinforcement of load-bearing reinforced concrete structures (foundations, columns, floors, etc.) - welding.5.

Electric and gas welder

Subject of the agreement

1.1. Under this employment contract, the Employee undertakes to perform the duties of an electric and gas welder of the [meaning] category in [place of work, indicating a separate structural unit and its location], and the Employer undertakes to provide the Employee with the necessary working conditions provided for by labor legislation, as well as timely and full payment of wages.

1.2. The employment contract is concluded for an indefinite period.

1.3. The employee must begin work on [day, month, year].

1.4. The probationary period for employment is [value] months.

1.5. Working for the Employer is the Employee’s [main/part-time] place of work.

Rights

3.1. A manual welder of the 5th category has the right to take actions to prevent and eliminate cases of any violations or inconsistencies.

3.2. A manual electric welder of the 5th category has the right to receive all social guarantees provided for by law.

3.3. An electric welder of manual welding of the 5th category has the right to demand assistance in the performance of his official duties and the exercise of rights.

3.4. An electric welder of manual welding of the 5th category has the right to demand the creation of organizational and technical conditions necessary for the performance of official duties and the provision of the necessary equipment and inventory.

3.5. A manual electric welder of the 5th category has the right to get acquainted with draft documents relating to his activities.

3.6. A manual welder of the 5th category has the right to request and receive documents, materials and information necessary to fulfill his job duties and management orders.

3.7. A manual electric welder of the 5th category has the right to improve his professional qualifications.

3.8. An electric welder of manual welding of the 5th category has the right to report all violations and inconsistencies identified in the course of his activities and make proposals for their elimination.

3.9. A manual electric welder of the 5th category has the right to familiarize himself with documents defining the rights and responsibilities of the position held, and criteria for assessing the quality of performance of job duties.

3.1. An electric welder of manual welding of the 5th category has the right to use actions to prevent and eliminate any damage or inconveniences.

3.2. An electric welder of manual welding of the 5th category has the right to exclude all social guarantees provided by law.

3.3. An electric welder of manual welding of the 5th category has the right to obtain agreement from the vykonnaya of its planting obligations and current rights.

3.4. An electric welder of manual welding of the 5th category has the right to obtain the creation of organizational and technical minds necessary for the production of garden bindings and the provision of the necessary equipment and equipment.

3.5. An electric welder of manual welding of the 5th category has the right to become familiar with the draft documents that relate to his activity.

3.6. An electric welder of manual welding of the 5th category has the right to request and accept documents, materials and information necessary for the establishment of their garden obligations and the order of servicing.

3.7. An electric welder of manual welding of the 5th category has the right to advance his professional qualifications.

3.8. An electric welder of manual welding of the 5th category has the right to report damage and inconsistencies identified in the process of its activity and make proposals before they are eliminated.

3.9. An electric welder of manual welding of the 5th category has the right to become familiar with the documents that indicate the rights and obligations for the borrowed land, the criteria for assessing the quality of the land obligations.

Guarantees and compensation

6.1. For an employee engaged in heavy work, work with harmful and (or) dangerous working conditions:

6.1.1. A reduced working time is established - no more than 36 hours per week in the manner established by the Government of the Russian Federation, taking into account the opinion of the Russian Tripartite Commission for the Regulation of Social and Labor Relations.

6.1.2. Annual additional paid leave is provided in the manner and under the conditions established by the Government of the Russian Federation, taking into account the opinion of the Russian Tripartite Commission for the Regulation of Social and Labor Relations.

6.1.3. Wages are set at an increased rate in the manner established by the Government of the Russian Federation, taking into account the opinion of the Russian Tripartite Commission for the Regulation of Social and Labor Relations, taking into account the opinion of the representative body of workers.

6.1.4. Milk or other equivalent food products are provided free of charge according to established standards in the manner established by the Government of the Russian Federation, taking into account the opinion of the Russian Tripartite Commission for the Regulation of Social and Labor Relations. The provision to an employee of milk or other equivalent food products according to established standards, upon his written application, may be replaced by a compensation payment in an amount equivalent to the cost of milk or other equivalent products in the manner established by the Government of the Russian Federation, taking into account the opinion of the Russian Tripartite Commission for the Regulation of Social and Labor Relations.

6.2. An employee engaged in work with particularly hazardous working conditions is provided with free medical and preventive nutrition according to established standards in the manner established by the Government of the Russian Federation, taking into account the opinion of the Russian Tripartite Commission for the Regulation of Social and Labor Relations.

Responsibility

4.1. An electric welder of manual welding of the 5th category is responsible for non-fulfillment or untimely fulfillment of the duties assigned by this job description and (or) non-use of the granted rights.

4.2. A manual welder of the 5th category is responsible for failure to comply with internal labor regulations, labor protection, safety regulations, industrial sanitation and fire protection.

4.3. An electric welder of manual welding of the 5th category is responsible for the disclosure of information about an organization (enterprise/institution) related to a trade secret.

4.4. An electric welder of manual welding of the 5th category is responsible for non-fulfillment or improper fulfillment of the requirements of internal regulatory documents of the organization (enterprise/institution) and legal orders of management.

4.5. An electric welder of manual welding of the 5th category is responsible for offenses committed in the course of his activities, within the limits established by the current administrative, criminal and civil legislation.

4.6. A manual electric welder of the 5th category is responsible for causing material damage to an organization (enterprise/institution) within the limits established by the current administrative, criminal and civil legislation.

4.7. A manual electric welder of the 5th category is responsible for the unlawful use of the granted official powers, as well as their use for personal purposes.

Fire prevention measures

A manual arc welder must comply with fire safety standards and regulations. He does not start work until the workplace is provided with fire extinguishing equipment: a box of sand, a shovel, buckets and a fire extinguisher.

Explosives and flammable substances, flammable materials are not stored at the workplace or in its immediate vicinity; wooden structures must be protected with sheets of metal or asbestos. After completing the work, check the remains of open fire and do not leave any pockets of flame.