Order of the Ministry of Construction of Russia dated October 26, 2015 No. 761/pr “On approval of the form of the acceptance certificate for services provided and (or) work performed on the maintenance and routine repairs of common property in an apartment building”

Certificate of work performed (services provided) Form No. FPU-26

Act on identifying non-contractual consumption of thermal energy, coolant Plot N ____________Address: _______________Act on identifying non-contractual consumption of thermal energy (coolant) g. ______________________ “___”________ ___ In accordance with paragraph 8 of Article 22 of the Federal Law of July 27, 2010 N 190-FZ “On Heat Supply”, a representative of the heat supply (heating network) organization ___________________ __________________________________________, (name) (position, full name) representative of the consumer (other person) who carried out the non-contractual consumption of thermal energy (coolant) _____________________________, (name or full name, address) _______________________________________________________________________ during (position, full name) inspection _________________________________________________________ at the address: (name, purpose of the object )______________________ established: 1.

Non-contractual consumption of thermal energy (coolant) without concluding a heat supply agreement in the prescribed manner (or consumption of thermal energy, coolant using heat consuming installations connected to the heat supply system in violation of the established paragraph _____ of the connection procedure, or consumption of thermal energy, coolant after the introduction of restrictions on the supply of thermal energy in an amount exceeding the permissible volume consumption, or consumption of thermal energy, coolant after submitting a request to the heat supply organization (heating network) organization to limit the supply of thermal energy or stop the consumption of thermal energy) at the address: _______________________________________.2. Type, type, technical parameters of the heat-consuming installation ___________________________________________________________________________________ (amount of circulating coolant, throughput ________________________________________________________________________________ supply pipeline with round-the-clock operation at

How the STD-R form is approved

Since March 7, 2020, Order No. 23n of the Ministry of Labor of Russia dated January 20, 2020 has been in effect, which approved the form of information about the labor activity of an STD-R employee. The same order regulates the procedure for filling out this certificate-report (Section II).

The official form of the STD-R form in 2020 occupies 1 A4 sheet and looks like this:

As you can see, the STD-R form includes the following blocks, each of which is required to be filled out:

• information about the employee;
• information about the employer;
• date of filing an application to continue maintaining a work record book or to provide information about work activity;
• directly information about the employee’s work activity;
• output data (certification of certificate)

Employers enter data into STD-R on the basis of administrative documents of the organization (orders, instructions, other decisions or documents confirming the formalization of labor relations between the employer (insurer) and the employee (registered person)) with an indication of them. It is also necessary to reflect information that has been canceled or corrected.

Form FPU-26 | part 1

Certificate of work performed (services provided).

Specialized form No. FPU-26 (appendix to the contract for the implementation of current uncoupling repairs of freight cars based on the work actually performed) Appendix No. 6 to the Agreement dated “__” ____________ 201_.

N ___Specialized form N FPU-26 Approved by Order of JSC Russian Railways dated December 15, 2008 N 2688р———Form according to OKUD ¦0305867¦+——-+Customer ________________________________________________ according to OKPO ¦ ¦(organization) +——-+__________________________________________________________ Business Unit ¦ ¦ (structural unit, address) +——-+Executor (Contractor) _________________________________ according to OKPO ¦ ¦ (organization) +——-+_________________________________________________________ Business Unit ¦ ¦ (structural unit, address) ————————— ¦ Number ¦ Date ¦+——-+——-+¦ ¦ ¦ACT ———+———on the work performed (services rendered) under the contract (work order) ___________________________________________ (name of the contract (work order), ___________________________________________________________________________ it date, number) We, the undersigned, representatives of the CONTRACTOR represented by _________________________________________________________________________________________________________________________________________________________________________ (positions, full name) and the CUSTOMER represented by ______________________________________________________________________________________________________________________________________________________________________________________________________________ (positions, full name) have drawn up this act stating that the work performed by the CONTRACTOR on _______________________________________________________________________________ (name of the object (stage), brief description of the results ______________________________________________________________________________ work, efficiency and significance) —————————————————————————¦ Name of types and stages ¦ units.

Certificate of completion of work: what is it used for, signing procedure, sample filling, accounting entries

/ / / , 3, Business entities can draw up agreements with each other, according to which one party performs a certain list of works for the other. The main document for such transactions is the concluded agreement. But to reflect that the transaction has taken place, the parties will be required to sign an acceptance certificate for the work performed.

Table of contents

When the parties formalize a contractual relationship regarding the performance of certain works, they only fix the obligations and rights under the contract. The contract itself does not reflect the fact of the transaction.

For this purpose, the customer and the contractor must, in addition to the agreement, draw up a certificate of completion of work. It is a document in which the work is recorded in value terms, and this form also reflects the date when the contractor carried out the work stipulated in the concluded agreement for the customer.

The contract establishes the subject of the relationship, that is, what needs to be done, the cost of the work, as well as the time period when these actions must be carried out. The parties prepare it and conclude it before they begin to carry out the actions provided for by it. It only records the presence of intentions.

But this document does not allow us to reflect the date of completion of the work, as well as the acceptance of the results by the customer. In these cases, the legislation establishes the need to draw up an act for the work performed. Its importance increases when work must be carried out in several stages.

In this case, it is stipulated that the contractor submits the work at each stage.

Attention! If the customer has any complaints, then he must reflect them when drawing up the acceptance certificate for the work performed. All controversial issues that arise during the course of work are recorded here. Moreover, the surrendering party may also have claims. It is important to remember that the act requires signing by each party, even if there are disagreements.

We fill out a sample certificate of completion of work under a service agreement

The agreement between the parties is drawn up both in approved forms and in free form, taking into account the characteristics of a specific government order and the sector of operation of the customer organization. The legislation does not provide for a single form of agreement, but in the procurement of construction or repair work it is used, OKUD number 0322005. This form was approved by Resolution of the State Statistics Committee of the Russian Federation No. 100 of November 11, 1999.

Recently, procurement control bodies have issued guidelines on the use of unified forms.

They reflect cases of violation of the terms of the contract, the calculation of penalties and the amount of payments, taking into account the withholding of penalties. Each customer organization has the opportunity to independently develop a convenient form and approve it in its local documents. When preparing it, provide the following information:

1. date of preparation and signing;
2. name, quantity and cost of work performed;
3. Document Number;
4. signatures and seal.
5. cost taking into account the applicable taxation system;
6. details of the parties;
7. number of the contract that is being closed;

If errors are found in the document, draw up a new one and cancel the old one.

The document can be prepared on the customer’s letterhead or in a standard format on A4 sheet. It is drawn up in two or more copies for each party to the government contract.

The document must include the following parameters:

1. turnaround time.
2. subject of purchase;
3. ;

As a general rule, a document agreeing on the results of the work performed is drawn up by the supplier, since he is responsible for the result and quality of the work.

More than two copies are drawn up if it is submitted to the customer’s supervisory or control authorities, for example to the Federal Treasury, for payment. The agreement is signed by both parties and sealed if used by organizations.

ACT St. Petersburg November 10, 2020 State Budgetary Institution

Certificate of completion of work (services rendered) 2020: download free new form and sample filling in Excel, Word, PDF

The acceptance certificate for completed work (rendered services) is a primary document that confirms the fulfillment of obligations under the contract and is proof that the customer has no complaints about the volume, timing and quality of work performed and services provided. The document must include the following information:

• Number and date of drawing up the act.
• Names of counterparties.
• Names of services provided or work performed.
• Expression of services provided or work performed in monetary and physical terms.
• Information about the persons responsible for the delivery and acceptance of work or services: positions, full names, personal signatures.

We recommend reading: Can a bank refuse to issue an application for waiver of insurance?

If several works or services were provided, they may be listed in one act in the form of a table.

The act is drawn up in two copies and certified by the seals and signatures of both parties to the agreement. An entrepreneur or company uses a standard form for a work completion certificate, develops the form themselves, or downloads it on the Internet.

Also, a separate act can be drawn up for each type of work or service.

All data in the act must coincide with similar information in the contract. If you need a work or service acceptance certificate form that meets legal requirements, download it for free in a suitable format. A completed document template will help you correctly draw up the act of completion of work under a contract.

Download it for free by selecting the format you need. Simplify and speed up the process of preparing and signing certificates of completed work and other primary documentation by registering in the KUB system.

Our service will allow you to fill out the necessary documents automatically and send them to counterparties by e-mail. Stop wasting time filling out templates and forms. The KUB service helps you issue invoices in 20 seconds and prepare other documents without a single mistake, due to the complete automation of filling out templates.

KUB is a new standard for issuing and sending invoices to customers. 14 days FREE ACCESS Automation of invoicing Automatic completion of buyer details using TIN Automatic verification of the correctness of bank details using BIC Correctly configured formulas, including for the calculation of VAT and Total invoice Automatic generation of the amount in words based on the final figures of the invoice amount Benefits Preparation of an invoice in 20 seconds No errors in invoices Less time on invoicing, and more time on business Increasing the speed of payment of invoices Automating the sending of invoices Automatically attaching your logo to the invoice Automatically attaching a scan of your signature to the invoice Automatically attaching a scan of your company's seal to the invoice Sending an invoice to the buyer's e-mail Benefits Sending an invoice in 2 click Beautiful and professional invoices You can issue invoices from your computer, tablet, smartphone No need to print out the invoice, sign, stamp and scan before sending Convenient online invoicing Instant sending of invoices by e-mail to your buyer Debt control for each buyer Management reporting Orderly storage of all of your documents 20% discount on accounting services from your accountant Stop wasting time filling out templates and forms The KUB service helps you issue invoices in 20 seconds and prepare other documents without a single mistake, due to the complete automation of filling out templates. KUB is a new standard for issuing and sending invoices to customers.

14 days FREE ACCESS Do you need help filling out documents or advice? Get help from expert accountants to prepare documents Send

(3 Rating, average: 5.00 out of 5)

Loading.

About SBERBANK

Appendix No. 1 to the Agreement dated “__” _________ 20__

Form FPU-26 ——— ¦ Code ¦ +——-+ Form according to OKUD ¦0305867¦ +——-+ Customer ________________________________________________ according to OKPO ¦ ¦ (organization) +——-+ _________________________________________________________ BU ¦ ¦ (structural unit, address) +——-+ Executor (Contractor) _________________________________ according to OKPO ¦ ¦ (organization) +——-+ __________________________________________________________ BU ¦ ¦ (structural unit, address) ——— —————— ¦ Number ¦ Date ¦ +——- +——-+ ACT ¦ ¦ ¦ ———+——— on the work performed (services provided) under the contract (work order) ___________________________________________ (name of the contract (work order), ___________________________________________________________________________ its date, number) We, the undersigned, representatives of the CONTRACTOR represented by ___________________ ___________________________________________________________________________ ______________________________________________________________________________ (positions, full name) and the CUSTOMER represented by ____________________________________________________________ ___________________________________________________________________________ ___________________________________________________________________________ (positions, full name) drew up this act stating that the work performed by the CONTRACTOR under ____ ___________________________________________________________________________ (name object (stage), brief description of the results of ___________________________________________________________________________ work, effectiveness and significance) ————————————————————————— ¦ Name of types and stages ¦ Unit. ¦ Work completed ¦ ¦ completed work ¦meas.+————————————+ ¦ ¦ ¦quantity¦ price for ¦cost,¦ ¦ ¦ ¦unit, rub.¦ rub.

¦ +———————————+—-+———-+————-+———-+

Certificate of work performed (services provided).

Specialized form N FPU-26 (attachment to the contract for routine uncoupling repairs of freight cars based on the work actually performed)

Subject of the document: Text version file: 6.5 kb Save the document: Appendix No. 6 to the Agreement dated “__” ____________ 201_ N ___ Specialized form N FPU-26 Approved by the Order of Russian Railways JSC dated December 15, 2008.

N 2688р ——— Form according to OKUD ¦0305867¦ +——-+ Customer ________________________________________________ according to OKPO ¦ ¦ (organization) +——-+ __________________________________________________________ BU ¦ ¦ (structural unit, address) +——-+ Performer (Contractor) _________________________________ according to OKPO ¦ ¦ (organization) +——-+ _________________________________________________________ BU ¦ ¦ (structural unit, address) ——— —————— ¦ Number ¦ Date ¦ +——-+——-+ ¦ ¦ ¦ ACT — ——+——— about the work performed (services provided) under the contract (work order) _________________________________________________________ (name of the contract (work order), ___________________________________________________________________________ its date, number) We are the undersigned, representatives of the CONTRACTOR represented by ____________________ ___________________________________________________________________________ ___________________________________________________________________________ (positions, names .Fundamental name) and the CUSTOMER represented by ______________________________________________________________ _____________________________________________________________________________ ___________________________________________________________________________ (positions, full name) have drawn up this act stating that the work performed by the CONTRACTOR on ____ ___________________________________________________________________________ (name of the object (stage), brief description of the results of ___________________________________________________________________________ work, effectiveness and significance) —————————————————————————— ¦ Name of types and stages ¦ units.

¦ work completed ¦ ¦ work completed ¦meas.+———————————+ ¦ ¦ ¦quantity¦ price for ¦cost,¦ ¦ ¦ ¦ ¦unit, rub.¦ rub.

Results

The write-off of inventories in most cases is recorded in a special act, the form of which is unified.

You can familiarize yourself with other features of writing off inventories in the articles:

• “The procedure for recording and writing off fuel and lubricants on waybills in 2019–2020”;
• “The procedure for writing off materials in accounting (nuances).”

You can find more complete information on the topic in ConsultantPlus. Full and free access to the system for 2 days.

Certificate of work performed (services provided). Form N FPU-26

Subject of the document: Text version file: 6.5 kb Save the document: Appendix No. 1 to the Agreement dated “__” _________ 20__

Form FPU-26 ——— ¦ Code ¦ +——-+ Form according to OKUD ¦0305867¦ +——-+ Customer ________________________________________________ according to OKPO ¦ ¦ (organization) +——-+ _________________________________________________________ BU ¦ ¦ (structural unit, address) +——-+ Executor (Contractor) _________________________________ according to OKPO ¦ ¦ (organization) +——-+ __________________________________________________________ BU ¦ ¦ (structural unit, address) ——— —————— ¦ Number ¦ Date ¦ +——- +——-+ ACT ¦ ¦ ¦ ———+——— on the work performed (services provided) under the contract (work order) ___________________________________________ (name of the contract (work order), ___________________________________________________________________________ its date, number) We, the undersigned, representatives of the CONTRACTOR represented by ___________________ ___________________________________________________________________________ ______________________________________________________________________________ (positions, full name) and the CUSTOMER represented by ____________________________________________________________ ___________________________________________________________________________ ___________________________________________________________________________ (positions, full name) drew up this act stating that the work performed by the CONTRACTOR under ____ ___________________________________________________________________________ (name object (stage), brief description of the results of ___________________________________________________________________________ work, effectiveness and significance) ————————————————————————— ¦ Name of types and stages ¦ Unit.

¦ Work completed ¦ ¦ completed work ¦meas.+————————————+ ¦ ¦ ¦quantity¦ price for ¦cost,¦ ¦ ¦ ¦unit, rub.¦ rub.

On approval of the approximate form of the contract for the implementation of current uncoupling repairs of freight cars

In order to formulate uniform approaches when concluding contracts for the implementation of current uncoupling repairs of freight cars, concluded on behalf of JSC Russian Railways: 1. Approve the attached sample form of the contract for the implementation of current uncoupling repairs of freight cars based on the actual scope of work performed.2. When drawing up contracts for routine uncoupling repairs of freight cars based on the work actually performed, railway managers should use the attached sample contract form.3.

When drawing up contracts for current uncoupling repairs at a single price, be guided by the one approved by the First Vice-President of JSC Russian Railways V.N. Morozov Approved: by order of JSC Russian Railways dated April 26, 2011 N 926r, Moscow "" 201 Open joint stock company Society "Russian Railways", hereinafter referred to as the "Contractor", represented by the head of the railway - a branch of JSC Russian Railways (indicate the name of the railway) (position, full name.

- fully) acting on the basis of (indicates the power of attorney authorizing the person to conclude the Agreement, for example: dated October twenty-eighth two thousand and three N 285-D) on the one hand, and “,” (indicates the full organizational and legal form of the legal entity and the name of the legal entity corresponding to its charter) hereinafter referred to as “Customer”, represented by , (position, full name) acting on the basis of (indicates a document authorizing the person to enter into an Agreement, for example: charter, power of attorney from the fifth May two thousand and two N AKB/15) on the other hand, hereinafter referred to as the “Parties”, have entered into this Agreement as follows: 1.1.

In accordance with the terms of this Agreement, the Customer instructs and undertakes to pay, and the Contractor undertakes to carry out routine uncoupling repairs (hereinafter referred to as TR-2) of freight cars owned by the Customer by right of ownership, lease or other legal basis (hereinafter referred to as freight cars) , in operational car depots (the name of the railway is indicated

Comment by Maria Lytaeva (Candidate of Pedagogical Sciences, Associate Professor of the Department of Foreign Languages ​​at the National Research University Higher School of Economics):

The order “On the federal list of textbooks recommended for use in the implementation of state-accredited educational programs of primary general, basic general, and secondary general education” was signed by the Minister of Education O. Yu. Vasilyeva on December 29, 2020.

The federal list of textbooks, as before, is divided into three sections. The basic section consists of 910 textbooks. The list also contains a section of adaptive textbooks for children with disabilities, which includes textbooks for elective subjects and a section of textbooks with a regional and ethnocultural component.

From the moment of publication, the order is considered valid and will be used by all regions to update and complete school libraries in preparation for the new school year.

German language teachers can choose textbooks from several lines, that is, the list of German language books is compiled on a competitive basis. However, it should be noted that only 2 series are included in all three parts of the list and provide continuity in teaching German as a first and second foreign language.

Firstly, the entire “Geeks Plus” series was fully included in the updated Federal List of textbooks recommended for use by the Ministry of Education of the Russian Federation. This means that all textbooks in the “Geeks Plus” series can be purchased using public funds. UMK "Geeks Plus" for grades 2–11 is the only fully completed series of textbooks included in the new FP dated December 28, 2018 on German as a first foreign language. By maintaining the continuity of the methodology for learning the German language in each year of study, the authors of the educational complex “Geeks Plus” guarantee successful passing of final exams, students reaching level B1 at the end of the course, as well as many interesting tasks, projects, colorful infographics and exciting lessons!

Numbers of textbooks in the Faculty of Education:

• "Geeks Plus" for grades 2-4: 1.1.2.1.11.1, 1.1.2.1.11.2, 1.1.2.1.11.3
• "Geeks Plus" for grades 5-9: 1.2.2.1.12.1, 1.2.2.1.12.2, 1.2.2.1.12.3, 1.2.2.1.12.4, 1.2.2.1.12.5
• "Geeks Plus" for grades 10-11: 1.3.2.1.6.1, 1.3.2.1.6.2

Secondly, the line of teaching materials "Horizons" for grades 10-11 was included in the new federal list of textbooks, which means the entire "Horizons" series from grades 5 to 11 is recommended for use by the Ministry of Education of the Russian Federation. This is the only fully completed series of textbooks included in the new FP dated December 28, 2018 on German as a second foreign language.

Numbers of textbooks in the Faculty of Education:

• "Horizons" for grades 5-9: 1.2.2.2.3.1, 1.2.2.2.3.2, 1.2.2.2.3.3, 1.2.2.2.3.4, 1.2.2.2.3.5
• “Horizons” for grades 10-11: 1.3.2.3.2.1, 1.3.2.3.2.2